McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

How to Fill a Dent

Learning how to fill a dent and paint back over it can really help you to take care of your car and keep it looking new for longer. Sometimes you get hit with large rocks on your hood or door bumps from parking lots that damage an otherwise perfectly contoured auto body. If you know how to fill a dent it can help you keep up your car and make it look newer for longer.

We can’t always avoid dents, try as we may. There are always situations in which these things happen, and they could happen to you as well as anyone else. But filling a dent is easier than you may think. Just fill in these dents and protect your green family car from rust over the course of time.

Materials to Fill Car Dents

There are several basic tools and pieces of equipment you’ll need to get this job done:

  •  Fiber glass repair kit;

  •  Wire brush;

  •  Abrasive paper;

  •  Solvent wipes;

  •  And paint.

Gathering the materials that you will need is the first step. Go to a trusted supplier to get the right stuff, and make sure to do a good job matching the paint. You will probably want to get help in this area. There are guides that you can reference to find out exactly what color you have, making it much simpler to match up.

Preparing the Car Dent

Next, once you have all the materials together and you are ready to go with the repair job, you will want to go ahead and prepare the area to be filled. First, remove any rust in the area using the wire brush. You could also opt for a sanding disk in a drill if you have one available or can borrow one from a friend. The idea here is to get all the way down to bare metal in this area.

Repairing a Car Dent

Next, you get the paste ready by mixing it with the appropriate amount of hardener. In most cases exact directions will be right on the packaging so this is usually not a difficult task. Apply the paste into the dented area or behind the holes if you are covering rust spots, and press it firmly into place. Once the paste has hardened, sand off any excess that is sticking out from the dented area to create a smooth surface. Once you have that area smoothed over and the correct contour, mix the filler and hardener and apply it to that smooth surface. Let it harden and then sand it smooth once more. Use the solvent wipe at this point to take off any excess grease or dust particles from the surface.

Now it is time to paint. First apply primer, and allow it to dry. Wet sand between coats, and allow it to dry, and repeat until you have full and complete coverage with the primer. Apply the paint and do at least three coats. Once you are done painting the surface and you are happy with the results, you can polish the area and you are finished. Now is a good time to wash and wax the car to disguise the new paint job.

Do it yourself dent repair for cars is not the simplest task to complete, but it is well worth doing if you feel confident that you can do it, because it can restore the beauty of your car for an inexpensive cost. Learn how to fill a dent and save money on auto body work for your own vehicle.

partners

FREE Quotes, Multiple Insurers

Zip Code